Hampton 水晶透明密封带Crystal Clear Sealing Tape
3 inch, 1.88 inch, 1.88 inch with dispenser, 0.75 inch with dispenser (left to right)
0.75 inch Crystal Clear Sealing Tape
Applications 应用
Sealing tape used to seal sitting drop crystallization experiments
Description
These optically clear tapes are compatible with protein crystallization reagents. The polypropylene Crystal Clear Sealing Tapes use acrylic solvent based adhesives which are compatible with aqueous crystallization reagents.
Catalog number HR3-511 is a 1.88 inch (48 mm) wide, 3 mil tape on a 43.7 yard (40 M) roll with a 1.5 inch core and is supplied with a green dispenser / cutter.Catalog number HR4-511 is a 1.88 inch wide, 3 mil tape on a 60 yard roll with a 3 inch core and no dispenser / cutter.Two strips of the HR3-511 or HR4-511 will seal a Corning, Cryschem, CrystalClear Strip, Greiner, Intelliplate, Linbro, Swissci (MRC), VDX and VDXm plate.Catalog number HR4-506 is a 3 inch wide, 3 mil tape on a 54.86 yard roll with a 3 inch core and no dispenser / cutter.One strip of the HR4-506 will seal a Corning, Cryschem M, CrystalClear Strip, Greiner, Intelliplate, Swissci (MRC) and VDXm plate.Crystal Clear Mini Sealing Tape HR4-508 is a 0.75 inch (19 mm) wide, 3 mil tape on a 650 inch (16.5 M) roll and is supplied with a clear dispenser / cutter. The tape is useful for resealing or patching wells after mounting crystals. The tape is also wide enough to seal a single row of a Cryschem S or Cryschem M plate.See chart for tape and plate compatibility.
标签归档:Hampton 蛋白质结晶试剂盒
Hampton Solubility & Stability Screen
Hampton Solubility & Stability Screen
Solubility & Stability Screen(溶解度和稳定性的屏幕)
应用:溶解性和稳定性屏幕的设计,以协助识别解决方案的条件,促进蛋白质的溶解性和稳定性,并尽量减少蛋白质沉淀。
Solubility & Stability Screen
Solubility & Stability Screen HR2-072
Applications
A solubility screen, a stability screen, an additive screen for protein assays including ThermoFluor and crystallization |
Preformulation screening |
Compatible with Thermofluor , Differential Scanning Fluorimetry (DSF), and Protein Thermal Shift assays |
96 sterile filtered reagents |
17 classes of reagents and excipients |
Highly concentrated (10x) reagent formulation |
Developed at Hampton Research |
Features
Methodologies
Thermal shift assay |
Dynamic Light Scattering |
Use Solubility & Stability Screen along side Slice pH and Solubility & Stability Screen 2 to optimize sample buffer |
Description
Solubility & Stability Screen is designed to assist in the identification of solution conditions which promote protein solubility and stability, and minimize protein precipitation. Solubility & Stability Screen is a solubility screen, a stability screen, and may also be used as an additive screen in the presence of a crystallization reagent.
The Hampton Research Solubility and Stability Screen can evaluate protein solubility, stability and crystallization in the presence of 94 different chemical additives sampling 17 different classes of reagents plus two controls.
Protein solubility and stability are universally required in a wide range of applications, including general biochemical studies, the preparation of proteins in pharmaceuticals, structural biology and crystallization.1-11The preparation of a concentrated, soluble and stable protein sample can often be a difficult task as proteins often aggregate, precipitate or denature.
Thermofluor (also known as Differential Scanning Fluorimetry, DSF and Protein Thermal Shift) provides a rapid, convenient and effective means of identifying subsaturating solution conditions that may also correlate with protein heterogeneity and poor crystallization outcomes.12
Protein solubility and stability is affected by many different chemical factors including pH, buffer type, chemical additives and excipients. pH and buffer type are dominant protein solubility and stability variables and can be evaluated and optimized using the Hampton Research Slice pH kit HR2-070. Slice pH evaluates protein solubility, stability and crystallization versus 20 different buffers over the pH range 3.5-9.6. Chemical additives influencing protein solubility and stability can be evaluated using the Solubility & Stability Screen.
It is widely accepted that protein solubility and stability can be increased by the use of chemical additives.5,15Seventeen classes of reagents are sampled by the Solubility & Stability Screen and each of these classes has been reported as important in improving sample solubility and stability.2-11
The Solubility & Stability Screen is a set of 94 high purity reagents formulated in high purity water (NCCLS/ASTM Type 1+) at 25°C and are 0.22 micron sterile filtered. The 94 solubility and stability reagents are formulated at 2 to 10 times their recommended working concentration. The remaining two reagents are water and a negative (TCA) control. A water control demonstrates the effect of diluting sample as well as sample buffer concentration. TCA, the negative control, demonstrates total sample precipitation, loss of sample solubility and loss of sample stability. The effects of the Solubility & Stability reagents can be compared with this negative control to assist in the identification of reagents promoting sample solubility and stability. 500 microliters of each reagent is supplied in a sterile 96 well polypropylene Deep Well block. The Solubility & Stability Screen reagents are compatible with the sitting or hanging drop vapor diffusion, microbatch, free interface diffusion, sandwich drop vapor diffusion, and dialysis crystallization methods utilizing water soluble reagents.
Hampton50号毛细管Glass Number 50 Capillaries
Hampton50号毛细管Glass Number 50 Capillaries
Glass Number 50 Capillaries
X-ray data collection
Liquid-liquid diffusion crystallization
Gel acupuncture crystallization
Glass Number 50 (borosilicate)
Thin walled – 10 micron
Description 描述
Glass Number 50 (borosilicate glass) capillaries that are extremely thin walled (approximately 10 micron wall thickness). The length of the capillary has a well defined diameter, with one end having a funnel shape and the other end closed. Glass capillaries have a wall thickness of 0.01 mm and an overall length of 80 mm +/- 5 mm. Glass capillaries are available in a wide range of outside diameters from 0.1 mm to 2.0 mm. They are designed to mount, hold, and store small molecule and biological macromolecular crystals for x-ray data collection. Capillaries can also be used for crystal density measurements and crystal growth experiments. The capillaries can be sealed tightly against moisture and gases using wax, epoxy, or other sealing materials.
In determining what glass or quartz capillary is right for you, please refer to the “Linear Absorption Coefficient µ cm-1” table. This table indicates the amount of radiation that is absorbed by the capillary during x-ray data collection.
For 0.1 mm to 2.0 mm capillaries the open end capillary tube base size is 3.0 +/- 0.15 mm OD x 0.13 +/- 0.10 mm Wall thickness.
The Diameter is measured 40 mm from the closed end. The tolerances are as follows
0.1 mm -0.075 / +0.075 mm
0.2 mm -0.050 / +0.050 mm
0.3 mm -0.050 / +0.100 mm
0.4 mm -0.100 / +0.100 mm
0.5 mm -0.100 / +0.100 mm
0.6 mm -0.100 / +0.100 mm
0.7 mm -0.150 / +0.150 mm
0.8 mm -0.150 / +0.150 mm
0.9 mm -0.150 / +0.150 mm
1.0 mm -0.150 / +0.250 mm
1.5 mm -0.250 / +0.250 mm
2.0 mm -0.250 / +0.250 mm
Capillaries have only been tested at atmospheric pressure (760 mmHg (torr), 29.92 inHg, 14.696 psi). Use at other pressures has not been tested.
Sigma代理 Abcam代理 CST代理 Santa Cruz代理 Biolegend代理 ebioscience代理 Invitrogen代理 millipore代理 BD流式抗体代理 GeneTe x抗体代理 Novus抗体代理 R&D代理 Biovison代理 Jackson代理 MBL抗体代理 ProSpec抗体代理 Bethyl抗体代理 Antibody Revolution抗体代理 Torrey Pines Biolabs代理 Amresco代理 MPbio代理 Laysan bio代理 NANOCS代理 Avanti代理 wako代理 lumiprobe代理(活性荧光染料) NEB酶代理 Roche酶代理 Toyobo酶代理 USP代理 EP代理 Dr代理 TRC代理 TCI代理 Reagecon代理 Megazyme代理 Hampton代理(蛋白结晶) whatman代理(滤膜滤纸) GE代理(蛋白纯化) Corning康宁代理 Axygen代理 Falcon代理 NISSUI日水代理 Himedia代理 OXOID代理 BD培养基代理 Ludger代理(糖蛋白分析产品) Eppendorf代理 Labnet代理 标准品代理 抗体代理 酶试剂代理 培养基代理 耗材代理 Elisa试剂盒代理 。
Hampton 24孔悬滴板 VDX Plate with sealant(带密封剂)
VDX Plate with sealant |
Hanging drop crystallization | ||
Sitting drop crystallization with Micro-Bridges® or Glass Sitting Drop Rods™ | ||
Dialysis crystallization with Dialysis Buttons™ |
24 well plate with raised cover | ||
Sealant applied to 24 wells, ready to seal with cover slides | ||
Compatible with 22 mm diameter square and circle cover slides | ||
Optically clear plastic | ||
Extremely versatile and cost-effective crystallization platform | ||
Compatible with UV crystal imaging when used with HR3-231 and HR3-233 – 22 mm x 0.22 mm Siliconized circle cover slides and HR3-215 and HR3-217 – 22 mm x 0.22 mm Siliconized square cover slides |
Description
24 well crystallization plate for hanging drop or sitting drop vapor diffusion crystallization (when used with Micro-Bridges or Glass Rods), or dialysis crystallization (when used with Dialysis Buttons). Stackable, optically clear plastic 24 well plates with raised covers (to allow room for cover slides) and flat bottoms for exceptional optics. Raised, wide rings around each reservoir (well) minimize cross contamination and allow each well to be individually sealed with 22 mm diameter circle or square cover slides. Plates are individually wrapped and supplied with applied sealant. 15.0 cm x 10.8 cm plate footprint is convenient for manual pipetting and well access while at the same time compatible with some automated liquid handling systems. Approximate dimensions: 15.0 cm x 10.6 cm x 2.2 cm. Approximate well size: 1.7 cm x 1.6 cm. Typical well volume: 500 to 1,000 µl. Well capacity: 3.5 ml.
CAT NO | NAME | DESCRIPTION |
HR3-172 | VDX邃「 Plate with sealant | 24 plate case |
HR3-170 | VDX邃「 Plate with sealant | 100 plate case |