产品型号15089
品 牌
Harris Aluminum Micro-punch打孔器有一个锋利的打孔头，可以从组织、胶、纸、衣服、培养基等材料上取样。打孔头由高碳不锈钢材质做成，经过热处理达到Rockwell硬度Rc-65。打孔头 的尺寸：0.5/1.0/1.2/2.0/3.0mm。每个Harris Micro-punch带有一个塑料刀头套、6 x 8“ 1.5mm厚垫。更换刀头、栓塞、垫均可单独购买。
详情介绍
Harris Micro-punch有一个锋利的打孔头，可以从组织、胶、纸、衣服、培养基等材料上取样。打孔头由高碳不锈钢材质做成，经过热处理达到Rockwell硬度Rc-65。打孔头 的尺寸：0.5/1.0/1.2/2.0/3.0mm。每个Harris Micro-punch带有一个塑料刀头套、6 x 8″ 1.5mm厚垫。更换刀头、栓塞、垫均可单独购买。
The lightweight, seamless barrel is machined from high grade 6061 aluminum tubing. It is anodized to form a protective, chemically resistant, long lasting surface for easy handling. The tips and ejection rods have the same specifications as the above plastic bodied Micro-Punchs. The plungers consist of a knob-screw assembly made from anodized aluminum with a 404 stainless steel ejection rod and spring. Each Harris Aluminum Micro-Punch® is sold with a protective plastic tip cover and a 6″ x 8″, 1.5 mm thick, inert, self-healing Harris cutting mat with dual cutting surfaces.
Harris Aluminum Micro-Punches complete with Ejection Rod, Tip, Tip guard and Cutting Mat:
15089 Harris Aluminum Micro-Punch, Tip Diameter 0.5mm
15089-2 Harris Aluminum Micro-Punch, Tip Diameter 1.0mm
15089-3 Harris Aluminum Micro-Punch, Tip Diameter 1.20mm
15089-4 Harris Aluminum Micro-Punch, Tip Diameter 2.0mm
15089-5 Harris Aluminum Micro-Punch, Tip Diameter 3.0mm
